Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2017 >> Sienna LE, AWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Pre-Collision System (Service Information) >> Seat Belt Control Ecu >> Installation [12/2015 - 11/2017] >> Procedure

Installation [12/2015 - 11/2017]: Procedure

  1. INSTALL SEAT BELT CONTROL ECU 
    1. Engage the 2 claws and install the seat belt control ECU.
  2. INSTALL ECU INTEGRATION BOX RH 

    (Refer to PROCEDURE - Step 2 )

  3. INSTALL GLOVE COMPARTMENT DOOR SUB-ASSEMBLY 

    (Refer to PROCEDURE - Step 27 )

  4. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH 
  5. INSTALL COWL SIDE TRIM BOARD RH 

    (Refer to PROCEDURE - Step 34 )

  6. INSTALL DOOR SCUFF PLATE ASSEMBLY RH 

    (Refer to PROCEDURE - Step 36 )

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Refer to INITIALIZATION [12/2015 - 08/2016] Refer to INITIALIZATION [08/2016 - 11/2017] ).

scientia non olet · About Mike's Workshop Manuals