Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2017 >> Prius Prime Advanced >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System - Service Information >> Oil Level Sensor >> Installation [09/2016 - ] >> Procedure

Installation [09/2016 - ]: Procedure

  1. INSTALL ENGINE OIL LEVEL SENSOR 
    1. Install the engine oil level sensor with the 2 bolts.

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

    2. Install a new clip to the engine oil level sensor.
    3. Connect the engine oil level sensor connector.
  2. INSTALL NO. 2 OIL PAN SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 4

  3. ADD ENGINE OIL 

    Refer to PROCEDURE - Step 5 [09/2016 - 05/2019] , or refer to PROCEDURE - Step 5 [05/2019 - 06/2021] , or refer to PROCEDURE - Step 5 [06/2021 - ]

  4. CHECK ENGINE OIL LEVEL 

    Refer to PROCEDURE - Step 1

  5. INSPECT FOR OIL LEAK 

    Refer to PROCEDURE - Step 6 [09/2016 - 05/2019] , or refer to PROCEDURE - Step 6 [05/2019 - 06/2021] , or refer to PROCEDURE - Step 6 [06/2021 - ]

  6. INSTALL NO. 1 ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 70 [09/2016 - 07/2020] , or refer to PROCEDURE - Step 70 [07/2020 - ]

scientia non olet · About Mike's Workshop Manuals