Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2017 >> Prius Prime Advanced >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel System - Service Information >> Fuel Pressure Regulator >> Installation [09/2016 - 12/2018] >> Procedure

Installation [09/2016 - 12/2018]: Procedure

  1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY 
    1. Apply gasoline to 2 new O-rings and then install them to the fuel pressure regulator assembly.
    2. Install the fuel pressure regulator assembly to the fuel filter.
      NOTE:

      Make sure that the O-rings are not cut or pinched during installation.

  2. INSTALL FUEL PUMP WITH FILTER ASSEMBLY 

    See step  1

  3. INSTALL FUEL SENDER GAUGE ASSEMBLY 

    See step  1

  4. INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY 

    Refer to INSTALLATION [09/2016 - 12/2018] 

scientia non olet · About Mike's Workshop Manuals