Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2017 >> Prius C Three >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (Service Information) >> Crankshaft Position Sensor >> Inspection [11/2015 - ] >> Procedure

Inspection [11/2015 - ]: Procedure

  1. INSPECT CRANK POSITION SENSOR 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 Cold 985 to 1600 Ω
      Hot 1265 to 1890 Ω

      HINT: 

      In the table above, the terms Cold and Hot refer to the temperature of the coils. Cold means approximately -10 to 50°C (14 to 122°F). Hot means approximately 50 to 100°C (122 to 212°F). If the resistance is not as specified, replace the camshaft position sensor.

scientia non olet · About Mike's Workshop Manuals