How To Proceed With Troubleshooting [02/2014 - ]: Procedure

Result: 

NEXT 

See step  2

1. Interview the customer to confirm the problem.

   Refer to HOW TO PROCEED WITH TROUBLESHOOTING [02/2014 - 11/2016]

   Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2016 - ]

Result: 

NEXT 

See step  3

1. Measure the auxiliary battery voltage with the power switch off.

   Standard Voltage

   11 to 14 V

   If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.

2. Check the fuses and relays.
3. Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.

Result: 

NEXT 

See step  4

1. Refer to Problem Symptoms Table.

   Refer to PROBLEM SYMPTOMS TABLE [02/2014 - ] 

   Result	Proceed to
   Fault is not listed in Problem Symptoms Table	A
   Fault is listed in Problem Symptoms Table	B

Result: 

B 

See step  6

Result: 

A 

See step  5

1. Terminals of ECU

   Refer to TERMINALS OF ECU [02/2014 - ] 

2. On-vehicle Inspection

   Refer to ON-VEHICLE INSPECTION [02/2014 - ] 

3. Inspection

   Refer to INSPECTION [02/2014 - ]

Result: 

NEXT 

See step  6

Result: 

NEXT 

See step  7

Result: 

NEXT 

END