How To Proceed With Troubleshooting [02/2014 - ]: Procedure
- VEHICLE BROUGHT TO WORKSHOP
NEXT
See step 2
- CUSTOMER PROBLEM ANALYSIS
- Confirm problem symptoms.
Refer to HOW TO PROCEED WITH TROUBLESHOOTING [02/2014 - 11/2016] or HOW TO PROCEED WITH TROUBLESHOOTING [11/2016 - ]
NEXT
See step 3
- Confirm problem symptoms.
- PASSENGER AIRBAG ON/OFF INDICATOR CHECK
- Proceed to Diagnosis System.
Refer to DIAGNOSIS SYSTEM [02/2014 - ]
NEXT
See step 4
- Proceed to Diagnosis System.
- DTC CHECK (Present and History DTCs) *
- Proceed to DTC Check / Clear.
Refer to DTC CHECK / CLEAR [02/2014 - ]
Body Electrical > Occupant Detection > Trouble Codes
OK
DTCs are not output.
Result
Proceed to OK NG
Result:
OK
GO TO PROBLEM SYMPTOMS TABLE. Refer to PROBLEM SYMPTOMS TABLE [02/2014 - ]
Result:
NG
See step 5
- Proceed to DTC Check / Clear.
- DTC CHART
- Proceed to Diagnostic Trouble Code Chart.
NEXT
See step 6
- CIRCUIT INSPECTION
NEXT
See step 7
- REPAIR
NEXT
See step 8
- CLEAR DTCS (Present and History DTCs) *
- Proceed to DTC Check / Clear.
Refer to DTC CHECK / CLEAR [02/2014 - ]
Body Electrical > Occupant Detection > Clear DTCs
NEXT
See step 9
- Proceed to DTC Check / Clear.
- DTC CHECK*
- Proceed to DTC Check / Clear.
Refer to DTC CHECK / CLEAR [02/2014 - ]
Body Electrical > Occupant Detection > Trouble Codes
OK
DTCs are not output.
Result
Proceed to OK NG
Result:
NG
GO TO DIAGNOSTIC TROUBLE CODE CHART. Refer to DIAGNOSTIC TROUBLE CODE CHART [02/2014 - ]
Result:
OK
See step 10
- Proceed to DTC Check / Clear.
- SYMPTOM SIMULATION
- Check the passenger airbag ON/OFF indicator condition.
NEXT
See step 11
- CONFIRMATION TEST