Inspection [06/2016 - ]: Procedure
- INSPECT PATTERN SELECT SWITCH ASSEMBLY
- Measure the resistance according to the value(s) in the table below.TEXT IN ILLUSTRATION
*a Component without harness connected
(Pattern Select Switch Assembly)Standard Resistance
Tester Connection Switch Condition Specified Condition 6 - 8 Pattern select (SNOW) switch on Below 1 Ω Pattern select (SNOW) switch off 10 kΩ or higher 4 - 8 Pattern select (SPORT) switch on Below 1 Ω Pattern select (SPORT) switch off 10 kΩ or higher If the result is not as specified, replace the pattern select switch assembly.
- Measure the resistance according to the value(s) in the table below.