Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2017 >> 86 Base, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Engine Starting System (Service Information) >> Ignition Switch >> Installation [03/2017 - ] >> Procedure

Installation [03/2017 - ]: Procedure

  1. INSTALL IGNITION OR STARTER SWITCH ASSEMBLY 
    1. Install the ignition or starter switch assembly with the 2 screws.
    2. Connect the connector.
  2. INSTALL UPPER STEERING COLUMN COVER 

    Refer to PROCEDURE - Step 5

  3. INSTALL LOWER STEERING COLUMN COVER 

    Refer to PROCEDURE - Step 6

  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 3

  5. INSTALL UPPER INSTRUMENT PANEL METER ORNAMENT 

    Refer to PROCEDURE - Step 5

  6. INSTALL METER HOOD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 6

  7. INSTALL INSTRUMENT PANEL ORNAMENT 

    Refer to PROCEDURE - Step 15

  8. INSTALL INSTRUMENT SIDE PANEL RH 

    Refer to PROCEDURE - Step 7

scientia non olet · About Mike's Workshop Manuals