Inspection [08/2015 - ]: Procedure
- INSPECT TRACTION CONTROL SWITCH (A-TRAC SWITCH)
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Switch Condition Specified Condition 5 (E) - 8 (ATRC) Pressed Below 1 Ω Not pressed 10 kΩ or higher TEXT IN ILLUSTRATION*a Component without harness connected
(A-TRAC Switch)If the result is not as specified, replace the traction control switch (A-TRAC switch).
- Measure the resistance according to the value(s) in the table below.