Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2015 >> Sienna LE, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Dynamic Radar Cruise Control System (Diagnostics - Introduction) >> Dynamic Radar Cruise Control System >> DTC Check/Clear [08/2014 - ] >> DTC Check/Clear [08/2014 - ]

DTC Check/Clear [08/2014 - ]

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Radar Cruise / Trouble Codes.
    5. Check the details of the DTC(s). Refer to DIAGNOSTIC TROUBLE CODE TABLE [08/2014 - ] .
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Radar Cruise / Trouble Codes.
    5. Clear the DTCs.
scientia non olet · About Mike's Workshop Manuals