Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2014 >> Land Cruiser >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Lighting System (Diagnostics - Introduction)) >> Lighting System >> DTC Check / Clear >> DTC Check / Clear

DTC Check / Clear

WARNING: This page is about a different car, the 2013 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
    5. Read the DTCs.
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
    5. Clear the DTCs.
scientia non olet · About Mike's Workshop Manuals