Common Specs & Procedures
YARIS COMMON SPECS & PROCEDURES
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | SERVICE DATA | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Axle Nut/Hub Nut | |||
| Front | 216 N.m (2, 203 kgf.cm, 160 ft. lbf) | ||
| Battery | SERVICE DATA | ||
| Brakes | |||
| Bleeding Sequence | BLEEDING | ||
| Disc \ Drum Brakes | |||
| Front | SERVICE DATA | ||
| Rear | SERVICE DATA | ||
| Torque | |||
| Front | TORQUE SPECIFICATIONS | ||
| Rear | TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | SERVICE DATA | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Drive Belts | |||
| Adjustment | ON-VEHICLE INSPECTION | ||
| Belt Routing | INSTALLATION | ||
| Engine Cooling | |||
| General Service Specifications | SERVICE DATA | ||
| Radiator Cap Pressure | Standard Value, 93.3 to 122.7 kpa (0.95 to 1.25 kgf/cm2
, 13.5 to 17.8 psi) Minimum Standard Value, 78.5 kpa (0.8 kgf/cm2 , 11.4 psi) |
||
| Thermostat R & I | THERMOSTAT (FOR HATCHBACK) | ||
| Water Pump R & I | WATER PUMP (FOR HATCHBACK) | ||
| Engine Mechanical | |||
| Compression | SERVICE DATA | ||
| Oil Pressure | @ idle, 29 kPa (0.3 kgf/cm2
, 4.3 psi) or more @ 3, 000 RPM, 150 to 550 kPa (1.5 to 5.6 kgf/cm2 , 22 to 80 psi) or more |
||
| Overhaul | SERVICE DATA | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. | ||
| Flywheel/Flex Plate (Drive Plate) Torque | |||
| Flywheel | Step 1, 49 N.m (500 kgf.cm, 38 ft. lbf) Step 2, Turn 90° |
||
| Drive Plate | 88 N.m (897 kgf.cm, 65 ft. lbf) | ||
| Fuel System | |||
| Pressure Specification | 304 to 343 kPa (3.1 to 3.5 kgf/cm2 , 44.1 to 49.7 psi) | ||
| Fuel Pressure Test Procedure | ON-VEHICLE INSPECTION | ||
| Fuel Filter Location | FUEL PUMP (FOR HATCHBACK) | ||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION |
||
| Spark Plug | |||
| Type | DENSO FK16HR11 | ||
| Gap | Standard electrode gap, 1.0 to 1.1 mm (0.039 to 0.043 in.) Maximum electrode gap, 1.3 mm (0.051 in.) |
||
| Torque | 18 N.m (184 kgf.cm, 13 ft. lbf) | ||
| Starting | |||
| Starter | SERVICE DATA | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | SERVICE DATA | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 103 N.m (1, 050 kgf.cm, 76 ft. lbf) | ||