Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2013 >> RAV4 XLE, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 54 (Brake Control System (Service Information) (Electric)) >> Steering Angle Sensor >> Installation >> Installation

Steering Angle Sensor: Installation: Installation

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL STEERING ANGLE SENSOR 
    1. Align the holes of the sensor with the pins on the spiral cable, and attach the 6 claws to install the sensor to the spiral cable.
  2. INSTALL SPIRAL CABLE SUB-ASSEMBLY  . Refer to INSTALLATION - Step 2
  3. INSTALL UPPER STEERING COLUMN COVER  . Refer to INSTALLATION - Step 14
  4. INSTALL LOWER STEERING COLUMN COVER  . Refer to INSTALLATION - Step 15
  5. INSTALL STEERING WHEEL ASSEMBLY 

    Refer to INSTALLATION

scientia non olet · About Mike's Workshop Manuals