Customize Parameters

WARNING: This page is about a different variant/trim than selected.

CUSTOMIZE LIGHTING SYSTEM (EXT)

HINT:

The following items can be customized.

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Record the current settings before customizing.

Customizing with the Techstream.

Connect the Techstream to the DLC3.
Turn the power switch on (IG).
Turn the Techstream on.
Enter the following menus: Utility / Customize / (desired system).

Select the setting by referring to the table below.

LIGHT CONTROL

Display	Default	Content	Setting	Relevant ECU
Disp Ex ON Sen	NORMAL	Changes the level of ambient light at which the system dims lights such as the indicator lights of the combination meter, the A/ C indicator light and the clock.*1	NORMAL, DARK2, DARK1, LIGHT1 or LIGHT2	Main body ECU (Instrument panel junction block assembly)
Disp Ex OFF Sen	NORMAL	Changes the level of ambient light at which the system cancels the dimming of lights such as the indicator lights of the combination meter, the A/C indicator light and the clock.*2	NORMAL, DARK2, DARK1, LIGHT1 or LIGHT2	Main body ECU (Instrument panel junction block assembly)
Light Auto OFF Delay	30 s	Function to continue illuminating the headlights and taillights for a certain period of time after closing the driver door after the power switch is turned from on (IG) to off with the headlight dimmer switch in the AUTO position and the headlights and taillights on.	OFF, 30 s, 60 s or 90 s	Main body ECU (Instrument panel junction block assembly)
Sensitivity	Normal	Adjusts the ambient light sensitivity of the automatic light control system.*3	Normal, Dark2, Dark1, Light1 or Light2	Main body ECU (Instrument panel junction block assembly)
DRL Function	ON	A function that enables or disables the DRL.	ON or OFF	Main body ECU (Instrument panel junction block assembly)

HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

System Setting	Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Setting	DARK2	DARK1	NORMAL	LIGHT1	LIGHT2

HINT:

When the setting is closer to the "Light" side, the system dims the indicator lights even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before dimming the indicator lights.

System Setting	Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Setting	DARK2	DARK1	NORMAL	LIGHT1	LIGHT2

HINT:

When the setting is closer to the "Dark" side, the system cancels the dimming of the indicator lights even when the surrounding area is relatively dark. When the setting is closer to the "Light" side, the system waits until the surrounding area is brighter before canceling the dimming of the indicator lights.

System Setting	Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Setting	Dark2	Dark1	Normal	Light1	Light2

HINT:

When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.