Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2013 >> Prius Two >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 35 (Emission Control System (Service Information) (Plug-In)) >> Fuel Tank Cap >> Inspection >> Inspection

Fuel Tank Cap: Inspection: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. INSPECT FUEL TANK CAP ASSEMBLY 
    1. Visually check that the cap and gasket are not deformed or damaged.
      Fig 1: Inspecting Fuel Tank Cap & Gasket
      GTY228677Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *1 Gasket

      If the result is not as specified, replace the fuel tank cap assembly.

      NOTE:

      Confirm that ID mark C is printed on the replacement fuel tank cap.

      Fig 2: Identifying ID Mark
      GTY333975Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *a ID Mark