Cruise Control Main Switch: Removal: Removal

REMOVE REAR NO. 2 FLOOR BOARD (for Separate Type) . Refer to REMOVAL - Step 1
REMOVE REAR DECK FLOOR BOX . Refer to REMOVAL - Step 2
REMOVE REAR NO. 3 FLOOR BOARD . Refer to REMOVAL - Step 3
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
WARNING:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .
REMOVE LOWER NO. 3 STEERING WHEEL COVER . Refer to REMOVAL - Step 6
REMOVE LOWER NO. 2 STEERING WHEEL COVER . Refer to REMOVAL - Step 7
REMOVE STEERING PAD . Refer to REMOVAL - Step 8
REMOVE CRUISE CONTROL MAIN SWITCH
1. Disconnect the connector.
  
  Fig 1: Identifying Cruise Control Main Switch
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 screws and cruise control main switch.
  
  Fig 2: Identifying Screws And Cruise Control Main Switch
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002