Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2013 >> Avalon XLE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Power Window Control System (Diagnostics - Introduction) (Hybrid)) >> Power Window Control System >> DTC Check / Clear >> DTC Check / Clear

DTC Check / Clear

WARNING: This page is about a different variant/trim than selected.
  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
    5. Check the details of the DTC(s). Refer to DIAGNOSTIC TROUBLE CODE CHART .
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
    5. Clear the DTCs.
scientia non olet · About Mike's Workshop Manuals