Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2012 >> Tundra Base, 5.7L Eng VIN W >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (3UR-FBE) (Service Information) >> Knock Sensor >> Inspection >> Inspection

Knock Sensor: Inspection: Inspection

  1. INSPECT KNOCK SENSOR 
    Fig 1: Checking Knock Sensor
    GTY139544Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 120 k to 280 kΩ

      If the result is not as specified, replace the sensor.

scientia non olet · About Mike's Workshop Manuals