Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2012 >> RAV4 Base, 2.5L Eng VIN F, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System (Diagnostics - Introduction) >> Cruise Control System >> Registration >> Registration

Cruise Control System: Registration: Registration

  1. PERFORM VEHICLE STABILITY CONTROL SYSTEM RECOGNITION IN ECM 
    NOTE:

    If the vehicle has both cruise control and VSC, when replacing ECM, perform VSC recognition as follows:

    1. Turn the ignition switch ON.
      2. Fig 1: Locating Cruise Control Main Switch ON-OFF
      GTY151410Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. After waiting approximately 5 seconds, turn the cruise control main switch ON.
    3. Keep the cruise control main switch ON for approximately 5 seconds or more.

      HINT: 

      The VSC recognition will not be reflected in the cruise control system until the ignition switch is turned OFF and ON.

scientia non olet · About Mike's Workshop Manuals