Data List / Active Test

HINT: 

Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Air Conditioner / Active Test.
5. Perform the Active Test according to the display on the Techstream.
   AIR CONDITIONER (AIR CONDITIONING AMPLIFIER ASSEMBLY)
   
   

   Tester Display	Test Part	Control Range	Diagnostic Note
   Defogger Relay (Rear)	Rear window defogger	OFF or ON	Operate with power switch on (IG)