Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2012 >> Prius Two >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Engine Immobilizer System (Except Plug-In) (Diagnostics - Introduction) >> Engine Immobilizer System >> DTC Check / Clear >> DTC Check / Clear

DTC Check / Clear

  1. CHECK FOR CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Smart Key / Trouble Codes.
    5. Check the details of the DTC(s). Refer to DIAGNOSTIC TROUBLE CODE CHART .
  2. CHECK FOR POWER MANAGEMENT CONTROL ECU (HV CPU) DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / HV Control / Trouble Codes.
    5. Check the details of the DTC(s).

      Refer to DIAGNOSTIC TROUBLE CODE CHART  for engine immobilizer system)

      Refer to DIAGNOSTIC TROUBLE CODE CHART for hybrid vehicle control system)

  3. CLEAR CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Smart Key / Trouble Codes.
    5. Clear the DTCs.
  4. CLEAR POWER MANAGEMENT CONTROL ECU (HV CPU) DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / HV Control / Trouble Codes.
    5. Clear the DTCs.
scientia non olet · About Mike's Workshop Manuals