Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2012 >> Prius Three >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 35 (Emission Control System (Plug-In) (Service Information)) >> Vacuum Sensor >> Removal >> Removal

Vacuum Sensor: Removal: Removal

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE NO. 2 CYLINDER HEAD COVER  . Refer to REMOVAL - Step 29
  2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY  . Refer to REMOVAL - Step 3
  3. REMOVE INLET AIR CLEANER ASSEMBLY  . Refer to REMOVAL - Step 31
  4. REMOVE AIR CLEANER CASE  . Refer to REMOVAL - Step 5
  5. REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR 
    1. Disconnect the connector.
      Fig 1: Identifying Manifold Absolute Pressure Sensor & Connector
      GTY231147Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and manifold absolute pressure sensor.
scientia non olet · About Mike's Workshop Manuals