Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2012 >> Matrix Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Vehicle Stability Control System (Diagnostic Codes & Symptom Tests)) >> Vehicle Stability Control System >> DTCS >> DTC C1440: Unusual Bank Angle Detected >> Description

DTC C1440: Unusual Bank Angle Detected: Description

WARNING: This page is about a different car, the 2011 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

If the skid control ECU determines that the vehicle is being driven at a steep bank angle, the skid control ECU stores DTC C1440 while VSC operation is temporarily disabled.

It is not a malfunction if the system and sensor circuits are normal and if the normal VSC operation resumes.

DTC Code DTC Detection Condition Trouble Area
C1440 Driving at a steep bank angle. Yaw rate and acceleration sensor