Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2012 >> Matrix Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Vehicle Stability Control System (Diagnostic Codes & Symptom Tests)) >> Vehicle Stability Control System >> DTCS >> DTC C1433: Steering Angle Sensor Internal Circuit >> Procedure

DTC C1433: Steering Angle Sensor Internal Circuit: Procedure

WARNING: This page is about a different car, the 2011 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. REPLACE STEERING ANGLE SENSOR 
    1. Replace the steering angle sensor. Refer to REMOVAL .

      HINT: 

      If troubleshooting has been carried out according to Problem Symptoms Table, refer back to the table and proceed to the next step. Refer to PROBLEM SYMPTOMS TABLE .

    NEXT → END