Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2012 >> Matrix Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 322 (Vehicle Stability Control System (Diagnostic Codes & Symptom Tests)) >> Vehicle Stability Control System >> DTC C1433: Steering Angle Sensor Internal Circuit >> Description

DTC C1433: Steering Angle Sensor Internal Circuit: Description

WARNING: This page is about a different car, the 2012 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

Steering angle sensor signals are sent to the skid control ECU via the CAN communication system. When there is a malfunction in the CAN communication system, it will be detected by the steering angle sensor zero point malfunction diagnostic function.

DTC Code DTC Detection Condition Trouble Area
C1433 When the IG1 terminal voltage is between 10 and 17.4 V, a malfunction signal is received from the steering angle sensor. Steering angle sensor
scientia non olet · About Mike's Workshop Manuals