Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2012 >> FJ Cruiser 4WD, Part Time T/Case Control >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Suspension Control System (Service Information)) >> Height Control Switch >> Installation >> Installation

Height Control Switch: Installation: Installation

WARNING: This page is about a different car, the 2012 Lexus GX 460. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL COMBINATION SWITCH ASSEMBLY (HEIGHT CONTROL SWITCH) 
    1. Install the combination switch (height control switch) with the 4 screws.
  2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY  . Refer to INSTALLATION - Step 5
  3. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY  . Refer to INSTALLATION - Step 6
  4. INSTALL INSTRUMENT PANEL FINISH PANEL END LH  . Refer to INSTALLATION - Step 7
  5. INSTALL INSTRUMENT PANEL FINISH PANEL END RH  . Refer to INSTALLATION - Step 8
  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .

  7. INSPECT SUSPENSION CONTROL SYSTEM 
    1. Inspect the suspension control system. Refer to TEST MODE PROCEDURE .
scientia non olet · About Mike's Workshop Manuals