Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2012 >> FJ Cruiser 4WD, Part Time T/Case Control >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Suspension Control System (Service Information)) >> Height Control Off Switch >> Inspection >> Inspection

Height Control Off Switch: Inspection: Inspection

WARNING: This page is about a different car, the 2012 Lexus GX 460. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT HEIGHT CONTROL OFF SWITCH 
    1. Measure the resistance according to the value(s) in the table below.
      Fig 1: Identifying Height Control Off Switch Connector Terminals
      GTY268459Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Switch Condition Specified Condition
      16 (N) - 9 (E) Height control OFF switch pressed Below 1 Ω
      Height control OFF switch not pressed 10 kΩ or higher
      TEXT IN ILLUSTRATION

      *a Component without harness connected
      (Height Control OFF Switch)

      If the result is not as specified, replace the height control OFF switch.