Control Valve Assembly: Installation: Installation

WARNING: This page is about a different car, the 2012 Lexus GX 460. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL NO. 2 HEIGHT CONTROL VALVE SUB-ASSEMBLY
1. Install the No. 2 height control valve with the 2 bolts.
  Torque: 29 N*m (296 kgf*cm, 21 ft.*lbf)
CONNECT HEIGHT CONTROL TUBE
1. Connect the 3 height control tubes. Refer to PRECAUTION .
  HINT:
  
  For the connection procedure of the tubes (type 1 and type 2), refer to Precaution of the Suspension Control System service information.
2. Connect the connector.
INSTALL FUEL PUMP CONTROL ECU ASSEMBLY . Refer to INSTALLATION - Step 1
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .
CHECK CONNECTION OF TUBE FOR AIR LEAK
1. Check the connections of the tubes for air leakage. Refer to PRECAUTION .