Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2012 >> Corolla Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 363 (Brake Control System (Service Information)) >> VSC Off Switch >> Removal >> Removal

VSC Off Switch: Removal: Removal

WARNING: This page is about a different car, the 2012 Toyota Matrix. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY  . Refer to REMOVAL - Step 16
  3. REMOVE VSC OFF SWITCH 
    1. Disengage the 2 claws and remove the VSC off switch.
      Fig 1: Disengaging VSC OFF Switch Claws
      GTY226621Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals