Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2012 >> Camry Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Combination Meter (Service Information)) >> Combination Meter >> Installation >> Installation

Combination Meter: Installation: Installation

WARNING: This page is about a different car, the 2012 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL COMBINATION METER ASSEMBLY 
    1. Connect the connector.
    2. Install the combination meter assembly with the 4 screws.
  2. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  . Refer to INSTALLATION - Step 30 .
  3. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY  . Refer to INSTALLATION - Step 31 .
  4. INSTALL INSTRUMENT PANEL FINISH PLATE (w/o Smart Key System)  . Refer to INSTALLATION - Step 32 .
  5. INSTALL CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL  . Refer to INSTALLATION - Step 37 .
  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .

scientia non olet · About Mike's Workshop Manuals