DTC B2313: Back Door Power Window Position/Seal Characteristics Data is not Memorized: Procedure

1. Initialize the power window regulator motor. Refer to INITIALIZATION .

NEXT: Go to next step 

1. Clear the DTC. Refer to DTC CHECK / CLEAR .
2. Check for DTCs. Refer to DTC CHECK / CLEAR .
   RESULT
   
   

   Result	Proceed to
   No DTCs output	A
   DTC B2313 is output	B

B → REPLACE BACK DOOR POWER WINDOW REGULATOR MOTOR ASSEMBLY 

A → END (POWER WINDOW CONTROL SYSTEM WAS NOT INITIALIZED)