Stabilizer Control Ecu: Removal: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
WARNING:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .
REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY
1. Remove the lower No. 1 instrument panel airbag assembly. Refer to REMOVAL .
REMOVE STABILIZER CONTROL ECU

Fig 1: Identifying Bolt & Stabilizer Control ECU
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Disconnect the connector.
2. Remove the bolt and stabilizer control ECU.
  NOTE:
  - Avoid any impact to the stabilizer control ECU.
  - Replace the stabilizer control ECU with a new one if it is dropped.