Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2011 >> Highlander SE, 2.7 A >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Lock System (Diagnostics - Introduction) >> Steering Lock System >> DTC Check / Clear >> DTC Check / Clear

DTC Check / Clear

  1. CHECK DTC 
    1. Connect Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the tester on.
    4. Enter the following menus:
      1. Select: Body Electrical / Smart Access / Trouble Codes /
    5. Read the DTCs.
  2. CLEAR DTC 
    1. Connect Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the tester on.
    4. Enter the following menus:
      1. Select: Body Electrical / Smart Access / Trouble Codes /
    5. Erase the DTCs.
scientia non olet · About Mike's Workshop Manuals