DTC B2313: Glass Position Initialization Incomplete: Procedure

1. Turn the ignition switch off.
2. Wait for at least 10 seconds, and then turn the ignition switch on (IG).
3. Check whether the DTC output recurs.

   Result

   Result	Proceed to
   B213 is not output	A
   B2313 is output	B

A → See step   4 

B: Go to next step 

1. Turn the ignition switch on (IG) and initialize the power window regulator motor (on the driver side), refer to INITIALIZATION .
2. Turn the ignition switch off.
3. Wait for at least 10 seconds, and then turn the ignition switch on (IG).
4. Check whether the DTC output recurs.

   Result

   Result	Proceed to
   B2313 is output	A
   B213 is not output	B

B → END 

A → See step   3