Diagnostic Trouble Code Chart

HINT: 

• If no abnormality is found when inspecting parts, inspect the skid control ECU and ground points for poor connections.
• If a trouble code is output during the DTC check, check the circuit indicated by the DTC. For details of each code, refer to the "article" for the respective "DTC Code" in the DTC chart.
• When 2 or more DTCs are output, perform circuit inspections one by one until the problem is identified.
• For DTCs output by the warning light or indicator light, refer to DTC CHECK / CLEAR  the DTC charts in DTC Check/Clear.
• Inspect the fuses and relays before inspecting the trouble areas shown in the table below.