Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2011 >> Avalon Base >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System (Diagnostics - Introduction) >> Cruise Control System >> DTC Check / Clear (To 12/2010) >> DTC Check / Clear

DTC Check / Clear

  1. DTC CHECK 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Cruise Control / Trouble Codes.
    5. Check the details of the DTC(s). Refer to DIAGNOSTIC TROUBLE CODE CHART .
  2. DTC CLEAR 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Cruise Control / Trouble Codes.
    5. Clear the DTCs.
scientia non olet · About Mike's Workshop Manuals