Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2010 >> Matrix Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System (Service Information) >> Clutch Switch >> Inspection >> Inspection

Clutch Switch: Inspection: Inspection

  1. INSPECT CLUTCH SWITCH (CRUISE CONTROL CANCEL SWITCH ASSEMBLY) 
    1. Measure the resistance according to the value(s) in the table below.
      Fig 1: Inspecting Clutch Switch (Cruise Control Cancel Switch Assembly)
      GTY246564Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Switch Condition Specified Condition
      1 - 2 Switch pin free 10 kΩ or higher
      Switch pin pushed in Below 1 Ω

      If the result is not as specified, replace the clutch switch.

scientia non olet · About Mike's Workshop Manuals