DTC B2071: Stop Light Control Relay Malfunction: Procedure

1. Use the Techstream to check if the CAN communication system is functioning normally. Refer to HOW TO PROCEED WITH TROUBLESHOOTING .

   OK

   DTC U0122 is not output.

   HINT: 

   DTC U0122: Lost Communication with Skid Control ECU

NG → See step   5 

OK: Go to next step 

1. Using the Techstream, enter the following menus: Chassis / ABS/VSC/TRAC / Trouble Code.
2. Clear the DTCs. Refer to DTC CHECK / CLEAR .
3. Check for DTCs. Refer to DTC CHECK / CLEAR .

   OK

   DTC C1380 is not output.

   HINT: 

   DTC C1380: Stop Light Control Relay Malfunction

NG → See step   6 

OK: Go to next step 

1. Using the Techstream, enter the following menus: Body Electrical / Pre-Collision / Trouble Code.
2. Clear the DTCs. Refer to DTC CHECK / CLEAR .
3. Check for DTCs. Refer to DTC CHECK / CLEAR .

   OK

   DTC B2071 is not output.

NG → See step   7 

OK → See step   4