Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2009 >> Yaris Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Windshield/WINDOWGLASS) >> Rear Power Window Switch >> Inspection

Rear Power Window Switch: Inspection

WARNING: This page is about a different car, the 2009 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY 
    1. Measure the resistance of the switch when the switch is operated.
      Fig 1: Identifying Power Window Regulator Switch Connectors
      G04476775Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard resistance 

      TERMINALS RESISTANCE SPECIFICATION

      Tester Connection Switch Condition Specified Condition
      1 - 2
      3 - 4
      UP Below 1 Ω
      1 - 2
      3 - 5
      OFF Below 1 Ω
      1 - 4
      3 - 5
      DOWN Below 1 Ω

      If the result is not as specified, replace the regulator switch assembly.