Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2009 >> Yaris Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Audio System & Visual System) >> Steering Pad Switch >> Removal

Steering Pad Switch: Removal

WARNING: This page is about a different car, the 2009 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE NO. 2 STEERING WHEEL COVER LOWER 
  3. REMOVE NO. 3 STEERING WHEEL COVER LOWER 
  4. REMOVE STEERING PAD ASSEMBLY (See  REMOVAL  ) 
  5. REMOVE STEERING PAD SWITCH LH 
    1. Detach the 2 claws and pull out the steering pad switch.
    2. Disconnect the connector and remove the steering pad switch.
      Fig 1: Identifying Steering Pad Switch Claws - LH
      G05189944Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE STEERING PAD SWITCH RH 
    1. Detach the 2 claws and pull out the steering pad switch.
    2. Disconnect the connector and remove the steering pad switch.
      Fig 2: Identifying Steering Pad Switch Claws - RH
      G05189945Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals