Network Gateway Ecu: Installation

WARNING: This page is about a different car, the 2009 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL NETWORK GATEWAY ECU
1. Install the network gateway ECU with the bolt.
2. Connect the connector.
INSTALL INSTRUMENT PANEL SUB-ASSEMBLY
1. Install the instrument panel (See INSTALLATION ) .
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Fig 1: Locating Network Gateway ECU Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.