Microphone Amplifier: Removal

WARNING: This page is about a different car, the 2009 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE MAP LIGHT ASSEMBLY (See REMOVAL )
REMOVE MICROPHONE AMPLIFIER ASSEMBLY
1. Remove the 3 screws and print board.
  
  Fig 1: Locating Print Board Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Detach the 4 claws and remove the amplifier cover.
3. Disconnect the connector.
  
  Fig 2: Identifying Amplifier Cover Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the microphone amplifier.