Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2009 >> Yaris Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Audio System & Visual System) >> Audio And Visual System >> Cannot Call in a Certain Place >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2009 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK SURROUNDING CONDITION 
    1. Check if the cellular phone can make calls in a certain location.

      OK: 

      It can make calls. 

    NG: END (CELLULAR PHONES CAN ONLY FUNCTION IN CELLULAR SERVICE AREAS) 

    OK: Go to next step 

  2. CHECK RECEPTION 
    1. Enter the "Information" screen by pressing the "INFO" switch.
    2. Select "Telephone".
      Fig 1: Information Screen Display - Telephone
      G05189843Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Check the "BT" mark.

      Result 

      RESULT

      Condition Proceed to
      Yellow color A
      Blue color B
      No connection mark is displayed C
      Fig 2: Information Screen Display - BT Mark
      G05189844Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    B: REPLACE MULTI-DISPLAY 

    C: SELECT REGISTERED CELLULAR PHONE OR REGISTER BLUETOOTH COMPATIBLE PHONE 

    A: BRING CELLULAR PHONE TO LOCATION WHERE BT MARK TURNS BLUE