Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2009 >> Venza 3.5 K, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (2GR-FE) - System And Component Inspection, Testing And R & I >> Engine Coolant Temperature Sensor >> Removal

Engine Coolant Temperature Sensor: Removal

  1. REMOVE NO. 1 ENGINE UNDER COVER 
  2. REMOVE NO. 2 ENGINE UNDER COVER 
  3. DRAIN ENGINE COOLANT  (See COOLANT )
  4. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL )
  5. REMOVE AIR CLEANER CAP WITH HOSE  (See REMOVAL  )
  6. REMOVE AIR CLEANER CASE  (See REMOVAL )
  7. REMOVE ENGINE COOLANT TEMPERATURE SENSOR 
    1. Disconnect the engine coolant temperature sensor connector.
    2. Remove the engine coolant temperature sensor and gasket.
      Fig 1: Locating Engine Coolant Temperature Sensor
      G06024047Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals