Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2009 >> Venza 2.7 E, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (1AR-FE) - System Testing, Removal & Installation >> Mass Air Flow Meter >> Removal

Mass Air Flow Meter: Removal

  1. REMOVE MASS AIR FLOW METER SUB-ASSEMBLY 
    1. Disconnect the mass air flow meter connector.
    2. Remove the 2 screws and mass air flow meter.
      Fig 1: Locating Screws And Mass Air Flow Meter
      G06023447Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals