Crankshaft Position Sensor: Inspection

INSPECT CRANKSHAFT POSITION SENSOR Text in Illustration

ILLUSTRATION LEGEND

*1	Component without harness connected (Crank Position Sensor)

Measure the resistance according to the value (s) in the table below.

Fig 1: Identifying Crankshaft Position Sensor Connector Terminals

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Standard Resistance

TESTER CONNECTION SPECIFIED CONDITION CHART

Tester Connection	Condition	Specified Condition
1-2	Cold	1630 to 2740 Ω
1-2	Hot	2065 to 3225 Ω

HINT:

In the table above, the terms "Cold" and "Hot" refer to the temperature of the coils. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F). If the result is not as specified, replace the crankshaft position sensor.