Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2009 >> Tundra Base, 5.7 W >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Cruise Control System) >> Laser Sensor >> Removal

Laser Sensor: Removal

WARNING: This page is about a different car, the 2008 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT BUMPER COVER 
    1. Remove the front bumper cover (See REMOVAL ).
  2. REMOVE LASER RADAR SENSOR 
    1. Disconnect the connector.
    2. Remove the 3 nuts and the laser radar sensor.
scientia non olet · About Mike's Workshop Manuals