Laser Sensor: Installation

WARNING: This page is about a different car, the 2008 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL LASER RADAR SENSOR
NOTE: Do not install the laser radar sensor if it has been damaged or received some sort of shock.
1. Install the laser sensor with the 3 nuts.
  Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
2. Connect the connector.
  
  Fig 1: Locating Laser Radar Sensor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT BUMPER COVER
1. Install the front bumper cover (See INSTALLATION ).