Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS
| Monitor runs whenever following DTCs not present | P0112, P0113 (Intake air temperature sensor) P0115, P0117, P0118 (Engine coolant temperature sensor) P0120, P0121, P0122, P0123, P0220, P0222, P0223, P2135 (Throttle position sensor) P0335, P0337, P0338 (Crankshaft position sensor) P0452, P0453 (EVAP System pressure sensor) P2401, P2402 (Leak detection pump) P2419, P2420 (EVAP System vent valve) |
| Throttle position (TP sensor voltage) | 0.2 V or more and 3.6 V or less |
| Time after engine start | 5 seconds or more |
| Battery voltage | 10.5 V or more |
| Engine coolant temperature | 70°C (158°F) or more |
| Estimated load | 30 to 100% |