Crankshaft Position Sensor: Inspection
WARNING: This page is about a different car, the 2009 Toyota Tacoma. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT CRANKSHAFT POSITION SENSOR
- Check the resistance.
- Using an ohmmeter, measure the resistance between the terminals.
Standard
TESTER CONNECTIONS SPECIFIED CONDITIONS CHARTTester Connection Specified Condition 1 (NE+) - 2 (NE-) 1,630 to 2,740 Ω at COLD 1 (NE+) - 2 (NE-) 2,065 to 3,225 Ω at HOT Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
HINT:
Cold and Hot mean the temperature of the coils themselves. Cold is from -10 to 50°C (14 to 122°F) and Hot is from 50 to 100°C (122 to 212°F).
If the result is not as specified, replace the camshaft position sensor.
- Using an ohmmeter, measure the resistance between the terminals.
- Check the resistance.